Controller detection before any rates change
Not applicableLiftoff auto-detects controllers and ships default mappings for well-known radios, so the documented first move is detection and calibration — not rates. This profile records the official support answer, including the two-stick minimum and the gamepad trade-off.
- Simulator
- liftoff
- Flight style
- Freestyle
- Skill level
- Beginner
Parameters
- Stick inputs required2 sticks
Applies to: The support page states a device needs 'at least two stick inputs' to be likely to work. Game controllers are supported but the page describes them as a handicap: limited sensitivity and sticks that snap back to centre, so throttle behaviour will not match a real radio. Do not treat a recognised device as a calibrated one.
Beginner bank setup: Angle before Rate
Simulator nativeVelociDrone ships four flight-mode banks on the 1–4 keys. This profile documents the documented beginner path: fly Angle first, then move to Rate once you can hold a line without self-levelling.
- Simulator
- velocidrone
- Flight style
- Fundamentals
- Skill level
- Beginner
Parameters
- Flight-mode banks4 banks
- Horizon self-levelling cutoff80 % stick throw
Applies to: Bank mode is a simulator-side mode switch, not a rates profile: switching banks does not change the rate values stored with the model. Angle and Horizon will not reproduce the attitude behaviour of a real quad in Acro, so treat them as orientation training only.
Betaflight 4.2 rates dialog, three profiles per model
BetaflightVelociDrone's Betaflight 4.2 dialog mirrors the settings on a real Betaflight flight controller and stores three separate rates profiles per model. This profile records where the dialog lives, what the profile slots are for, and the save behaviour that trips people up.
- Simulator
- velocidrone
- Flight style
- Racing
- Skill level
- Intermediate
Parameters
- Rates profiles per model3 profiles
- Selectable rates types5 types
Applies to: The manual warns against PID tuning unless you understand PID controllers — the shipped models are described as race-ready. Values do not transfer to other simulators automatically, and switching rates type converts the current numbers into the new model rather than preserving the exact feel.
Controller calibration order that avoids spurious input
Not applicableVelociDrone accepts any transmitter that outputs all stick channels over USB, but the manual puts two steps before calibration: power the radio first, and calibrate the radio itself. This profile records that order and the gamepad throttle-curve workaround.
- Simulator
- velocidrone
- Flight style
- Fundamentals
- Skill level
- Beginner
Parameters
- Stick channels required4 channels
Applies to: The manual documents a Windows driver regression that stopped FrSky and Jumper transmitters working as USB joysticks, and warns that a Windows driver update can reintroduce it — check the OpenTX version it recommends. A spring-centred gamepad will never match a real radio's throttle stick, so treat throttle-curve softening as a workaround, not a calibration.
No verified profile matches these filters.